podnoob.blogg.se - P8 mms104 serial communication protocol

P8 mms104 serial communication protocol how to#
P8 mms104 serial communication protocol serial#
P8 mms104 serial communication protocol full#

The received information will look like this: The received information will be stored in the RSR register, which acts as a temporary buffer storage. To do so, the register RX9 will be zero (RX9=0). Now, let’s define the receiver side to receive 8 bit information. The information before the transmission looks like this: The bit TX9 will be zero (TX9=0) - which determines that the transmission will be 8-bit transmission, so there is no need to address TX9D bit, which stores the ninth bit of information. This information will be stored inside TXREG register, which acts as a temporary buffer storage of information prior to transmission. Let’s assume that we need to transmit the following information: 10110010. RCSTA - Receive Status and Control Register.TXSTA - Transmit Status and Control Register.

P8 mms104 serial communication protocol serial#

To enable the serial communication with PIC micro we must set different parameters within two registers: (click the links for the explanation of each bit) a Half-Duplex synchronous system that can communicate with peripheral devices, such as A/D or D/A integrated circuits, serial EEPROMs, etc.a Full-Duplex asynchronous system that can communicate with peripheral devices, such as CRT terminals and personal computers.To communicate with external components such as computers or microcontrollers, the PIC micro uses a component called USART - Universal Synchronous Asynchronous Receiver Transmitter.

“Start” bit marks the beginning of a new frame.įrames of information must not necessarily be transmitted at equal time space, since they are independent of the clock.

In this case, the information is divided into frames, in the size of byte.

P8 mms104 serial communication protocol full#

When using the asynchronous communication - the transmitter and the receiver refraining to transmit long sequences of bits because there isn't a full synchronization between the transmitter, that sends the data, and the receiver, that receives the data. This type of communication is faster compare to the asynchronous communication since it is "constantly transmitting” the information, with no stops. The clock frequency can be transmitted along with the information, while it is encoded in the information itself, or in many cases there is an additional wire for the clock. That means that the transmitter and the receiver are synchronized between them by the same clock frequency.

and the clock frequency is transmitted along with the bits.

When using the synchronous communication – the information is transmitted from the transmitter to the receiver: In addition to the serial and parallel communications, there are 2 types of communication we will explore: Transmitting the word 10011101 using parallel communication. When using the parallel communication, however, the number of bits will be transmitted at once from one computer to the second computer. Transmitting the word 10011101 using serial communication. When using the serial communication we transmit the multi-bit word bit after bit (when at any given moment only one bit will pass). We have a multi-bit word, and we want to transmit it from one computer to the second computer. In order to understand what serial communication is, and emphasize the difference between serial communication and parallel communication, let’s take a look at the following example: There are two options to differentiate when speaking about transmission of information on the transmission lines:

We will start with the definition of media concepts.

P8 mms104 serial communication protocol how to#

We will show how to set USART in order to allow communication between PIC to PIC or between PIC to a personal computer.

the implementation of the PIC serial communication (C program and a video).

USART Transmit and Receive block diagrams.

how to calculate the value being placed in the SPBRG register.

how to enable serial communication - TXSTA and RCSTA registers.

synchronous and asynchronous communications.

It is a universal communication component (Synchronous/Asynchronous), which can be used as transmitter or as receiver. In this tutorial we will study the communication component – USART (Universal Synchronous Asynchronous Receiver Transmitter) located within the PIC. PIC serial communication tutorial Introduction to Serial communication with PIC16F877 microcontrollerĬLICK here for a quick PIC serial communication tutorial